* Not actual product image

69004

1102-1 Dial Indicator Diameter Gage 69004

Dial Indicator Diameter Gages measure both outside and inside diameters by comparing dimensions to gage blocks or an adjustable setting master. Each gage consists of a strong rectangular box beam with a sensitive gaging contact at one end and a reference gaging contact at the other. The 1102 is a light, easy-to-handle gage that is a workhorse in its range. Approximate weight is 1 lb, 12 oz. (0.8kg). The gaging depth can be set within a range of 0-1" (0-25mm) by adjusting the rest foot. Dial indicators are the 81-136-623 Inch Reading (.0005") or 81-181- 623 Millimeter Reading (0.01mm) models. The gage should be checked against our 1127 Master for a precise reference standard during production gaging. Also available on request with .0001" or 0.002mm graduations. 1-12” Length Range, 0-1” Height Adjustment The gage should be checked against our 1127 Master for a precise reference standard during production gaging. Also available on request with .0001" or 0.002mm graduations. Range: 1-12", Graduation: .0001"

Features
Specifications



Contact Starrett

Features

  • The sensitive contact transfers dimensions to the dial indicator through a linear friction-free mechanism
  • There are two gage feet at the reference end and one foot at the sensitive end of the gage to set the gage on the work and align the contacts
  • Gage depth is set by adjusting the gage feet up or down
  • A lever-actuated reverse mechanism loads the gage for either inside or outside diameter measurements
  • The gage contacts are easily changed to I.D. or O.D. gaging by turning them end for end
  • Unless otherwise specified, the dial indicator sent with the gage reads in .0005" increments with a total range of ±.030"
  • The dial has a double row of graduations reading in opposite directions – minus in red and plus in black

Specifications

  • Range (in): 1-12"
  • Graduations (in): .0001"