56134

1102 Dial Indicator Diameter Gage 56134

Dial Indicator Diameter Gages measure both outside and inside diameters by comparing dimensions to gage blocks or an adjustable setting master. Each gage consists of a strong rectangular box beam with a sensitive gaging contact at one end and a reference gaging contact at the other. The 1102 is a light, easy-to-handle gage that is a workhorse in its range. Approximate weight is 1 lb, 12 oz. (0.8kg). The gaging depth can be set within a range of 0-1" (0-25mm) by adjusting the rest foot. Dial indicators are the 81-136-623 Inch Reading (.0005") or 81-181- 623 Millimeter Reading (0.01mm) models. The gage should be checked against our 1127 Master for a precise reference standard during production gaging. Also available on request with .0001" or 0.002mm graduations. 1-12" Length Range, 0-1" Height Adjustment The gage should be checked against our 1127 Master for a precise reference standard during production gaging. Also available on request with .0001" or 0.002mm graduations. Range: 1-12", Graduation: .0005"

Features
Specifications
Downloads
Open Starrett-3D Parts Catalog



Contact Starrett

Features

  • The sensitive contact transfers dimensions to the dial indicator through a linear friction-free mechanism
  • There are two gage feet at the reference end and one foot at the sensitive end of the gage to set the gage on the work and align the contacts
  • Gage depth is set by adjusting the gage feet up or down
  • A lever-actuated reverse mechanism loads the gage for either inside or outside diameter measurements
  • The gage contacts are easily changed to I.D. or O.D. gaging by turning them end for end
  • Unless otherwise specified, the dial indicator sent with the gage reads in .0005" increments with a total range of +/-.030"
  • The dial has a double row of graduations reading in opposite directions - minus in red and plus in black

Specifications

  • Range (in): 1-12"
  • Graduations (in): .0005"